Free Web Counters

LED Cannon Flash   

I WILL SHOW YOU HOW TO PLACE A LED INSIDE THE CANNON OF YOUR HENG LONG TANK SO THAT WHEN YOU PRESS THE "K" KEY IT WILL RECOIL AS USUAL AND THE LED WILL FLASH (YOU WON'T BE ABLE TO SHOOT BB'S ANYMORE)

USE A 5 MM LED HIGH INTENSITY (SUPER WHITE)

AVAILABLE AT RADIO SHACK

1. TO BEGIN YOU MUST REMOVE THE UPPER HULL

2. REMOVE THE GUN TURRET RING, AND THE BASE OF THE HULL

3. REMOVE THE CANNON CAREFULLY, MAKING SURE TO PROTECT THE WIRING

4. TAKE OUT THE METAL TUBE INSIDE THE CANNON

5. NEXT PREPARE YOUR LED BY INSTALLING A WIRE ON THE POSITIF LEAD AND A WIRE ON THE NEGATIF LEAD

6. ATTACH ENOUGH WIRE LENGTH TO CONNECT TO THE CIRCUIT BOARD

7. THE CIRCUIT BOARD WILL REDUCE THE CURENT TO 3.6 VOLTS WHICH IS THE OPERATING VOLTAGE OF THE LED

8. NEXT SLIDE THE WIRES WITH THE LED INSIDE THE TUBE AND REINSTALL IT IN THE CANNON

9. PASS THE WIRES INSIDE THE RING AND REINSTALL THE RING

10. SOLDER THE NEW WIRES TO THE CIRCUIT BOARD AT THESE POINTS:

top of page